PRICES include / exclude VAT
Homepage>CSN EN 50411-2-8 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1
Sponsored link
Released: 2009
CSN EN 50411-2-8 - Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1

CSN EN 50411-2-8

Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1

CURRENCY
LANGUAGE
English
Number of Standard:CSN EN 50411-2-8
Number of Standard:ILNAS EN 50411-2-8
Category:359249
Released:2009
DESCRIPTION

EN 50411-2-8


EN 50411-2-8 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1 - 1.1 Product identification This specification contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements of a fully installed blown fibre ‘microduct’ connector in order for it to be categorised as an EN standard product. This product specification covers the following ‘microduct connectors’ to suit a wide range of blown fibre applications, for floating or fixed: • joining the same size microduct, or different sizes of microduct; • joining same size protected microduct, to same or different size of microduct or protected microduct; • disconnection of the connector to gain access, for example, to insert blowing equipment; • a means to seal the fibre inside the connector to prevent the flow of liquids; • close off open-ended microducts. This product specification covers blown fibre microduct connectors for use in ‘sub-ducts or protected micro-duct cable closures’ as specified in EN 50411-2-5 for use in outside environments, and for both sealed and non-sealed closures. The outside environment includes both subterranean (underground) and/or aerial applications. This document includes reducer/enlarger products. It may not be possible to blow through these devices. Manual feeding may be required because of the pressure gradient step. This product specification does not apply to microduct connectors for use in direct sunlight. 1.2 Operating environment The tests selected, combined with the severity and duration, are representative of an outside plant environment for both subterranean and aerial environments defined by • ETSI EN 300 019 series: class 8.1: underground locations, • EN 61753-1: all categories. 1.3 Reliability Whilst the anticipated service life expectancy of the product in these environments is 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme. 1.4 Quality assurance Complia

Original English text of CSN EN Standard.
The price of the Standard included all amendments and correcturs.